Post-Construction Cleaning After New Floors and Paint in Monroe, NC
The floors had been replaced and the walls repainted. What remained in this approximately 3,000-square-foot home was fine construction dust and scattered paint specks. The job called for three Great Cleaning Pro cleaners working for four hours. The challenge was to remove renovation residue while protecting the finishes the homeowner had just paid for.
Follow the dust beyond the open floor
The narrow ledge above the baseboard, the face of a vent and the edge of a door casing can hold dust even when the center of the room looks clean. Pick up loose particles before damp wiping. A vacuum with a suitable attachment lets the crew reach the joint between the wall and floor without pushing debris across the new finish. Cleaning accessible vent covers is a different task from cleaning inside ductwork.
Separate paint specks from ordinary dirt
A spot that stays in place after loose dust is removed deserves a closer look. The right treatment depends on both the paint and the surface underneath. A method suitable for glass can mark a coated plank. Have the flooring care instructions available and ask the painter when fresh surfaces can be cleaned. If a spot requires force or an unapproved product, flag it for the installer.
When to schedule a final clean
For a renovation in Monroe, NC 28110, tell us whether sanding, touch-up painting or flooring work will continue after our visit. If trades are still producing dust, agree which rooms are ready now and which should wait. At the walkthrough, look along floor edges in side light and check the trim above the doors as well as the open floor.
The four-hour duration describes this project. Your estimate depends on the affected rooms, residue and surfaces involved. Request a post-renovation cleaning in Monroe and include the flooring type and the date the trades expect to finish.